全部

1·Organize roller before hot-press roller has the function of preheating.

热压辊前面的整理辊可带预热功能。

2·Bonding process of cold forming with ply pressure is introduced, and compared with hot-press approach.

介绍了叠压冷成型粘结法，且与热压法进行对比。

3·The characteristic of water movement during the process of hot-press drying of bamboo timber was studied.

研究了竹材热压干燥过程中的水分迁移特性。

4·The gold concentrates are pretreated by alkaline hot-press oxidation followed by flash cyanidation in autoclave.

本文通过试验研究提出了在碱性压热氧化条件下，金精矿在高压釜内进行闪速氰化的新工艺。

5·This paper makes use the original system of pretreating refractory ore by hot-press oxidation to extract gold by cyanide process.

通过试验研究，提出了利用难处理矿石的热压氧化预处理的原有体系直接进行氰化提金的新工艺。

6·SHF ceramic lining is produced based on the material of mullite corundumporcelain by the method of multi-filler formula and hot-press casting.

以莫来石— 刚玉质瓷为材质，采用多熟料配方和热压铸成型方法制备S HF 陶瓷衬垫。

7·The gradient ceramic-metal composites was prepared by the hot-press sintering method, and the static and dynamic mechanical performance were tested.

利用热压烧结法制备了梯度型陶瓷—金属复合材料，并对其静态压缩性能和动态冲击压缩性能进行了测试。

8·The design method of hot-press for producing the hard pressboard cylinder is introduced and the calculation method of its structure strength is presented.

介绍了硬纸筒加工用热压机的设计方法，其中对结构强度的计算方法作了重点介绍。

9·The composites cooled inside the hot-press machine has lower void content and higher crystallinity and tensile strength than that in the nature-cooling condit…

在压机内冷却的方式比自然冷却方式制成的复合材料空隙率低、结晶度高、拉伸强力大。

10·In this test, through comparing the different effect of hot-press treatment on physical and mechanical behavior, treatment of poplar wood on hot press is adopted.

采用试验用热压机对速生杨木进行热压处理，比较不同条件下压缩对试材主要物理力学性能的影响。

热压

1·The design method of hot-press for producing the hard pressboard cylinder is introduced and the calculation method of its structure strength is presented.

介绍了硬纸筒加工用热压机的设计方法，其中对结构强度的计算方法作了重点介绍。

2·The segments of the laser-welded small diamond saws are sintered by hot-press, and their density is higher than that of the saws sintered whole, but the sharpness drops.

激光焊接小锯片刀头是通过热压烧结而成，其刀头比以往整体烧结的刀头致密，但锋利度不够。

3·Bonding process of cold forming with ply pressure is introduced, and compared with hot-press approach.

介绍了叠压冷成型粘结法，且与热压法进行对比。

4·The characteristic of water movement during the process of hot-press drying of bamboo timber was studied.

研究了竹材热压干燥过程中的水分迁移特性。

5·The gradient ceramic-metal composites was prepared by the hot-press sintering method, and the static and dynamic mechanical performance were tested.

利用热压烧结法制备了梯度型陶瓷—金属复合材料，并对其静态压缩性能和动态冲击压缩性能进行了测试。