全部

1·They provide a constant depth of cut and fewer blade changes.

它们提供了切不断深入和减少叶片的变化。

2·Thee three factors of cutting include cutting speed, feed and the depth of cut.

切削用量三要素包括切削速度、进给量和（或叫吃刀量）。

3·Dry and wet masonry blades provide a consistent depth of cut with less dust than abrasives.

干湿砖石刀片提供少于磨料粉尘削减一致的深度。

4·Depth of cut, d, is the normal distance between the unmachined surface and the machined surface.

切削深度d是未加工面与已加工面之间的垂直距离。

5·This particular model predicts the depth of cut achievable with any given set of process parameters.

这个模糊控制模型可以预测在任何给定一组加工参数时，可获得的切割深度。

6·It can also be seen that the maximum depth of cut is achieved directly as the cutter engages with the workpiece.

还可以看到当刀具进入工件切削时直接达到最大切削深度。

7·Early machine tools were operated by craftsmen who decided many variables such as speeds, feeds, and depth of cut, etc.

老式机床通常是由工人操作并由他们决定机床速度、进给量、切削深度等。

8·Impact cutting and cutting compared, not only can increase depth of cut, but can also reduce the large number of cutting force.

冲击切削与静压切削相比，不仅可以增大切削深度，而且可以大量降低切削力。

9·In this paper, effects of depth of cut and feedrate on mechanical properties of metallic fiber are investigated by spinning bit.

研究了用自旋转车刀加工金属纤维时，切削深度和进给量对纤维力学性能的影响。

10·During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.

在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。