全部

1·Finally, age-hardening effect of the alloy is studied.

最后研究了该合金的时效硬化效应。

2·The effect of loading speed is also investigated, significant rate-hardening effect is observed.

加载速度的影响进行了研究，重大率硬化效应观察到。

3·The results show that the granite has strain rate effect, hardening effect and jumping behaviors of stress-strain curve.

结论表明，在此应变率段花岗岩材料具有明显的应变率硬化效应，峰值应力前应力-应变曲线的跃进特性。

4·Carburizing, cyaniding, and induction hardening are some of the processes commonly used to produce the case hardening effect.

碳化、氰化、感应淬火是局部淬火中经常使用的处理方法。

5·Results showed that this type of hardener can perform characteristic quick hardening effect without any post hardening action.

结果表明该坚膜剂具有坚膜速度快、无后期坚膜效应的特点。

6·The research results show that the microstructure and work hardening mechanism are distinguishing under different work hardening effect;

结果表明，在不同硬化条件下高锰钢中的硬化组织不同，其加工硬化的机制也不相同。

7·These experimental results indicate that these two materials exhibit significantly the deformation-hardening effect in the stress range studied.

实验结果表明，在所研究的压力区间里，两种材料表现出明显的加工硬化效应。

8·The precipitation hardening effect and the grain refining effect of trace elements vanadium and titanium in microalloyed steels were researched on.

本文研究了微量元素钒、钛在非调质钢中的析出硬化作用和细化晶粒作用。

9·The mesophase did not appear. As the hardening effect and the thermal effect, hardness distribution near the interface of titanium and aluminum are different.

由于爆炸硬化和爆炸热效应的共同作用，界面附近钛板和铝板硬度分布规律不同。

10·Considering the linear strain-hardening effect of materials, this paper proposes a computation method for the stresses and strength of autofrettaged cylinders.

本文主要讨论了在材料线性应变硬化效应的情况下，自紧管应力与强度的计算公式的推导。