全部

1·The cathode contact undesirable discharge, such as nickel strip, nickel strip gold, nickel strip tin.

阴极接触不良放电，如剥镍，镍剥金，镍剥锡。

2·Shielding set of main function is used to prevent the rotor stator winding copper strip and with reactor coolant contact.

屏蔽套的次要作用是用来避免转子铜条和定子绕组与反响堆冷却剂接触。

3·Using a developed modified influence function method, the cold rolling of thin strip in both symmetric and asymmetric cases were analysed with considering work roll edge contact.

在考虑工作辊边部接触的前提下，采用自行开发的改良影响函数法对薄带的对称和非对称冷轧过程进行了分析。

4·But the peak of contact pressure between rolls forms when the intermediate roll shifts, which leads local wear of rolls and quality defects of strip.

但由于中间辊轴向窜动后，在工作辊与中间辊、中间辊与支撑辊间形成接触压力峰值，导致轧辊局部磨损及带材表面质量问题。

5·The aim thereof is providing an ice and snow slide plate whose substrate's front end turns up to avoid a direct contact of a shutter and a ground, and whose strip can be adjusted momentarily.

其目的是提供一种基板前端翘起，避免闸板与地面直接接触，且板带可随时 调节的冰雪滑板。

6·The special rubber strip is effective to protect the role of flat cable, not only to avoid the scratch of the cable, but also to make contact more closely, to avoid the risk caused by loose.

特制的橡胶条有效的起到了保护扁电缆的作用，不仅避免了电缆的划伤，还使接触更紧密，避免因松动而带来的风险。

7·As the brush body replaces the elastic strip, the contact area is increased with the charging roller, and the cleaning effect on the charge roller is relatively improved.

由于采用了刷体替代了弹性片，增加了与充电辊的接触面积，可相对提高对充电辊的清洁效果。

8·DN and DN1 series marsh welders are widely used in the welding of low carbon steel strip, corrosion resistant plate, wires, silver contact and lots of non-ferrous metals.

DN 1系列点焊机广泛应用于工业生产中低碳钢板、不锈钢板、线材，银触头及大部分有色金属的焊接。

9·The method is characterized by minimizing residence time of steel strip in contact with the aluminium-zinc-silicon alloy bath in the pot.

所述方法的特征在于将钢带在镀覆锅中浸入铝-锌-硅合金浴的停留时间最小化。

10·Conductive rubber strip is silver, aluminum glass silver and silver conductive grains distribution in rubber, through the pressure of conductive particle contact, achieve good conductivity.

导电胶条是将玻璃镀银、铝镀银、银等导电颗粒均匀分布在橡胶中，通过压力使导电颗粒接触，达到良好的导电性能。