全部

1·Its hydrostatic pressure resistant is more than 50 KPa.

它的耐静水压能力超过50kpa。

2·How is your mold constructed, that it will take 700 KPa?

是怎样的模具构造，它会采取700千帕？

3·The flash point test result is automatically corrected to standard pressure (101.3 kPa).

闪点测试结果会自动更正为标准压力(101.3千帕)。

4·The software requirement management (SRM) is the first key process area (KPA) in the CMM.

需求管理是CMM中的首个关键过程域。

5·These pumps feature very high flow and high compression pressure (80 to 120 kPa) compared to their sizes.

这些泵的功能非常高流动性和高压缩压力(80至120千帕)相比，它们的大小。

6·Therefore, to maintain the pressure during the day is about 30-35 kPa at night to maintain pressure in the region following 30 kPa.

因此，白天保持地区的压力是30—35千帕左右，夜间地区压力保持在30以下千帕。

7·Separation efficiencies of hollow glass beads were measured under room temperature and different nozzle inlet total pressures from 482 kPa to 537 kPa.

建立了超音速气固两相分离装置试验系统，在室温和不同喷管进口全压下，对空心玻璃珠颗粒的分离效率进行了试验研究。

8·But CMM only tells us what we should do, not providing specific knowledge and skills needed to realize KPA. So the application of CMM is still in exploration phase.

但CMM只告诉了我们应该做什么，没有提供实现关键过程域所需要的具体知识和技能，因此很多软件公司在应用时还处于探索阶段。

9·Compensate for momentary surges in gas pressure with a restrictive orifice in inlet pressure channel on the models with pressure range of 1 to 26 in. wc (0.25 to 6.5 kPa).

为一时激增补偿与渠道，在入口压力与压力范围为1 ？二十六英寸厕所(0.25至6.5千帕)的模式限制口的气体压力。

10·Except for level 1, each capacity level consists several different key process areas (KPA), which aim to describe a set of targets and key practices of the software process.

除了第一级以外，每级成熟度又由若干个关键过程域(KPA)构成，用以描述在某级成熟度下，软件过程在某一方面应达到的一组目标以及实现这些目标的一组关键活动。