全部

1·Leakage currents are generated by stray resistance paths between the measurement circuit and nearby voltage sources.

泄漏电流是由测量电路和附近的电压源之间的寄生电阻通路产生的。

2·Switching and measuring voltage sources with high internal impedance are subject to a number of errors, including offset currents, stray leakage paths, and electrostatic interference.

切换和测量具有高内阻的电压源会受各种误差的影响，包括偏移电流、寄生漏泄通路，以及静电干扰。

3·If the selected voltage transfer function circuit is not sensitive to stray capacitance, then the implemented simulation impedance circuit is also not sensitive to stray capacitance.

如果所选用的电压传递函数电路对杂散电容不灵敏，那么实现的模拟阻抗电路对杂散电容也是不灵敏的。

4·Capacitor voltage divider is the voltage sensor. The influence of stray capacitor to measurement is discussed, and the influence of transient element to the divider is analyzed.

电容分压器是所采用的电压传感元件，本文讨论了杂散电容对测量误差的影响，分析了电网暂态现象对分压器的影响。

5·In large production converters, due to the stray inductance, the switching transient spike is usually beyond the voltage allowed by the device, which can destroy the converter.

在大功率风电变换器中，由于杂散电感的存在，器件在关断过程中往往会产生超出允许范围的瞬态尖峰值，从而导致其失效和损坏。

6·VCM, the common-mode voltage between the sensor and the signal ground, results from nearby noise sources resulting from stray capacitive coupling.

传感器和信号地之间的共模电压VCM来自周围杂散电容耦合带来的噪声源。