全部

1·To send your car door, HISS device and electric ignition, need 10 days time.

要寄你的车电门锁，HISS装置和点火器来，需要10个工作日时间。

2·In this paper, a test method for the delayed arming circuit of the electric ignition fuze is introduced.

论文介绍了一种航空电触发引信延解电路的检测法，用于对长期贮存后的引信进行无损检测。

3·A new method is provided to confirm the safety and reliability of the electric ignition system in electromagnetic environment.

此测试系统有数据处理方便和测量误差小等优点，为桥丝式电火工品的电磁环境效应评估提供了一条新的途径。

4·Both three kind of single and two parallel connecting water-activated battery may rapidly and reliably fire common electric ignition head.

三种单个水电池和两个并联的水电池都可以迅速、可靠地点燃普通电点火头。

5·A battery provides the electric power to operate the starting motor and the ignition system during cranking.

在启动时，蓄电池提供电能能使启动电机和点火系运转。

6·Alternator: Source of direct electric current in modern vehicles for ignition, lights, fans, and other USES.

交流发电机：现代车辆的直流电源，用于点火、照明、风扇等处。

7·It is found that the instable start (ignition) voltage is related to the structure and the size of electrode as well as to the physical property of liquid electric inductivity.

分析表明：突变现象是感应充电进入电晕充电的固有特性，电压降低，电流突然增大，产生突变，且不稳定的起始(着火)电压与电极的结构形式、尺寸、液体介电物理性质有关。

8·Using the high voltage between the two electrodes to breakdown of gas layer, thus generating an electric arc ignition devices.

利用高电压来击穿其两电极之间的气体绝缘层，从而产生电弧的一种电火花点火设备。

9·In order to initiate the LP without arc formation, effects and coupling of electric pulse characteristics, ignition configuration parameters on LP ignition property are investigated.

实验研究了实现无电弧点火、限制电弧放电所需的电源特性参数及点火结构参数。

10·Thermal ignition temperature was defined, the thermal ignition process of electric hot wire initiating devices was divided as calefactive phase and explosion phase.

定义了热点火温度，将桥丝式电火工品的热点火过程分为升温阶段和爆炸阶段。