全部

1·A cost-based index ORing (RIDSCN) plan.

一个基于成本的索引oring (RIDSCN)计划。

2·Continue exclusive ORing until you have consumed all the blocks.

继续exclusive OR操作直到完成了所有块。

3·Inspect the oring for any cuts or nicks and replace if necessary.

检查o形环是否有任何割伤或刻痕，如果必要，则进行更换。

4·Both ANDing and ORing are demonstrated in the following complete aspect.

在下面这个完整的切面中演示了ANDing和oring。

5·One more reason may be the RHM sensor need to be fitted with oring on the sensor.

还有一个原因可能是RHM传感器需要在传感器上安装O形圈。

6·Furthermore, we can develop customized products oring customers' special requirements.

我们并能够根据客户的要求开发研制安全可靠的产品。

7·Rotate one half of the valve body 180o making sure the lower valve seat and oring stay in position.

将阀体的一半旋转180o，确保较低的阀座和O形环留在位置上。

8·A guideline to force the optimizer to choose the index oring operation to access the EMPLOYEE table.

另一个原则是迫使优化器选择索引“或”操作来访问employee表。

9·The db2exfmt output for an index ORing plan shows a RIDSCN operator with two or more XISCAN operators as input.

索引oring计划的db 2 exfmt输出显示了一个ridscn操作符，其中以两个或更多个XISCAN操作符作为输入。

10·The work design and structure of oring conveying rubber belts for special continuity were studied in this paper.

研究了有特殊连续性要求的环形输送带带芯的结构设计及施工设计。