全部

1·Shaft sleeve: Sure to change sleeve when its surface is rough and damaged seriously.

轴套：表面粗糙及损伤严重时，更换轴套。

2·Regularly check the wear of pipe shaft sleeve , wear in time after a larger replacement.

定期检查管道泵轴套的磨损情况，磨损较大后应及时更换。

3·The shaft sleeve and mechanical seal can be replaced without removing the shaft from the pump.

轴套和机封的更换不必将轴从泵上拆下来。

4·The main parts of pump are pump casing, pump cover, impeller, shaft, shaft sleeve and supporting parts.

主要由泵体、泵盖、叶轮、轴、轴套和支承部分构成。

5·Gear after heat treatment with high hardness and strength, and shaft installed in the replaceable shaft sleeve.

齿轮经热处理有较高的硬度和强度，与轴一同安装在可更换的轴套内运转。

6·The main parts of pump are pump casing, pump cover, impeller, shaft, sealing ring, shaft sleeve, bearing and shaft seal etc.

泵主要由泵体、泵盖、叶轮、轴、密封环、轴套、轴承、轴封等零件组成。

7·The upper end of the lifting rod is provided with the shaft sleeve and a button which are connected with the eccentricity handle.

提升杆上端装有与偏心把手连接的轴套和按钮。

8·A shaft sleeve installation assembly for a rotation shaft relates to the field for a shaft protecting sleeve on the rotation shaft.

转动轴用轴套安装组合件涉及固定安装在转动轴上的护轴轴套领域。

9·Wax precision casting is adopted for the shaft sleeve, increasing material utilization ratio by 77% and realizing less cutting and no cutting.

铸造工艺采用石蜡精铸成型，使材料利用率提高77％，达到少切削、不切削目的；

10·HanYingchun. Wang Xueming. Chen Yubao the new technology of the forward extrusion and cross rolling for the rear axle shaft sleeve of light truck.

韩英淳。王学明。陈义宝农用运输车正挤与横轧式后桥半轴套管。

轴套

1·The shaft sleeve and mechanical seal can be replaced without removing the shaft from the pump.

轴套和机封的更换不必将轴从泵上拆下来。

2·Regularly check the wear of pipe shaft sleeve , wear in time after a larger replacement.

定期检查管道泵轴套的磨损情况，磨损较大后应及时更换。

3·The upper end of the lifting rod is provided with the shaft sleeve and a button which are connected with the eccentricity handle.

提升杆上端装有与偏心把手连接的轴套和按钮。

4·The main parts of pump are pump casing, pump cover, impeller, shaft, shaft sleeve and supporting parts.

主要由泵体、泵盖、叶轮、轴、轴套和支承部分构成。

5·The main parts of pump are pump casing, pump cover, impeller, shaft, sealing ring, shaft sleeve, bearing and shaft seal etc.

泵主要由泵体、泵盖、叶轮、轴、密封环、轴套、轴承、轴封等零件组成。