全部

1·Lock the support ring onto the diverter housing and release it from the slip joint.

将隔水管张力器支撑环销到转喷器壳体上，从伸缩节上松脱。

2·Lock on to rotation ring unit.

锁定转环单位。

3·Collapsible Coiler - Rotates on Large Ball Bearings? Power Drive Assembly or Hand Operated? Large Heavy Duty Casters? Floor Lock Brakes? Guide ring? Tool and Tag Tray.

可折叠，绕在大滚珠轴承上？电力驱动或手动？重型大脚轮？地面锁制动器？导向环？工具和配件存储盘。

4·The purpose of this paper is to analyses the structure, working principle and common troubles of twin cone lock ring synchronizer and to study the control methods and trouble shooting ways.

对汽车锁环式双锥面同步器的结构、工作原理、常见故障类型进行分析研究，找出发生故障的原因，然后提出解决和控制的方法。

5·Find your lost or stolen phone, auto enable GPS(rooted phones), make it ring, remotely lock, remotely wipe, take a picture of the thief, hide the app, know with whom the thief is speaking!

找到您的手机丢失或被盗，自动启用GPS（植根于手机），环，远程锁定，远程擦除，采取小偷的照片，隐藏的应用程序，与谁知道小偷是讲！

6·Replace by seating the assembly in the lamp housing and turning the lock ring 1/8 turn clockwise to secure.

更换组合，将组合定位于灯的外壳并顺时钟旋转锁杆1/8圈以固定。

7·Rotate the SKIM and its mounting bracket downwards and then to the side away from the steering column to slide the SKIM antenna ring from around the ignition switch lock cylinder housing.

向下旋动skim及其安装托架，然后向转向柱侧面旋转，将skim天线环滑动到点火开关锁柱插槽附近。

8·This paper describes basic structures and working principle for the machine for cutting and expanding the wheel lock ring, showing the design concept about essential elements.

介绍挡锁圈扩切机基本结构及工作原理；机床的几个关键部位的设计构思。

9·An analysis was conducted of the common faults and their causes of the high pressure screw lock ring heat exchangers found in inspection and repair, and some solutions were proposed.

对螺纹锁紧环式换热器检修过程中常出现故障及原因进行了分析，并提出解决办法及建议。

10·The double shell side heat exchanger for use in hydrogenated unit is divided into two kinds of flange type and thread lock ring type.

加氢装置用双壳程换热器分为法兰式和螺纹锁紧环式两种。