全部

1·The main purpose of our study is to use such material in photoelastic-plastic stress analysis.

研究的主要目的是把这种材料应用于光弹塑性应力分析。

2·Design by Rule, Design by Analysis, Elastic Stress Analysis, Limit Load Analysis, Elastic-Plastic Stress Analysis.

按规则设计，按分析设计，弹性应力分析，极限载荷分析，弹-塑性应力分析。

3·Cai Kaike takes the billet surface reheating into account, and establishes a heat transfer and elastic-plastic stress model.

蔡开科考虑铸坯温度回升，建立了铸坯热-弹-塑性应力模型。

4·Then, the strain accumulation model of EPFC growth is presented based on an analysis of elastic-plastic stress and strain at the crack-tip.

在对裂尖弹塑性应力应变分析的基础上，作者建立了疲劳裂纹扩展的应变累积模型。

5·The equation of lateral disturbance used to analyize the problem is developed by taking into account the effect of elastic-plastic stress wave.

考虑了弹塑性应力波传播对屈曲的影响，建立了该问题横向扰动方程。

6·The Cam-clay model has widely been used in the last decades which described the main features of soil elastic-plastic stress-strain relationship.

著名的剑桥模型描述了土的塑性本构关系，在提出的几十年中已得到广泛的应用。

7·The elastic-plastic stress and displacement fields of cylindrically orthotropic composite thick-walled tube under uniform radial pressure are studied.

研究了在均匀径向压力作用下圆柱正交异性复合厚壁圆筒的弹-塑性应力场和位移场。

8·For the isotropic plastic material, the anisotropic plastic stress fields at a slowly propagating crack tip become the perfectly plastic stress fields.

对于各向同性塑性材料，缓慢扩展裂纹尖端的各向异性塑性应力场就变成理想塑性应力场。

9·Using the theory of thermal elastic-plastic stress, this paper calculates the residual stress distribution in the heavy welded I-section by finite element method.

本文根据热弹塑性应力理论，用有限元法分析了厚板焊接工形截面柱的残余应力。

10·The effects of case parameters on the distribution of elastic-plastic stress hi railhead are analyzed including lateral displacement, gross rail load on axle and constrained conditions of rail bottom.

对于工况参数，主要分析了横移量、轴重和轨底约束对轮轨滚动接触应力场的影响。