全部

1·Outer cooling jacket made of glass borosilicate glass;

外部冷却套管由玻璃硼硅玻璃制成；

2·If an external cooling jacket is used, the requirement on valve material can be further reduced.

如在阀体外加上外冷却夹套，则可进一步降低对阀材料的要求。

3·For dirty water or sanitary sewage applications, clogging of the cooling jacket passages can easily occur due to a build-up of solids, grease, corrosion and other matter.

但是对于污水或生活污水应用领域，冷却套通道由于淤积固体颗粒、油脂、腐蚀等等却极易发生堵塞。

4·The top of the mixing crock is provided with an inlet of sugar materials, a gas entrance, and a pressure gauge, and the outer wall of the mixing crock is provided with a water cooling jacket.

搅拌缸顶部设有糖料入口，气体进出口和压力表，搅拌缸外壁设有冷却水套。

5·Secondly, two dimensional conductive model of cooling jacket was set up and numerical simulation was carried out using one dimensional results. Temperature field in cooling jacket was computed.

其次建立了推力室的冷却套二维导热模型，使用数值模拟的方法和一维计算的结果，得到了冷却套的温度场。

6·Three-way regulating valve is currently used to control the temperature of cooling water in jacket cooling water system of main marine diesel engine.

为了实现船舶主柴油机的变流量冷却，需要对主机缸套冷却水系统进行水力计算。

7·A water - cooling system consists of water jacket, water pump, radiator, thermostat, cooling fan, rubber hose, etc.

水冷法系统包括水套，水泵，幅射器，温箱，冷却风扇，橡胶水喉，等。

8·Two completely different schemes for cooling water flow are obtained by changing the diesel engine's water flow from the oil condenser to the water jacket of the cylinder block.

通过改变柴油机从机油冷却器流入机体水套的水流动方式，得到两种完全不同的冷却水流动方案。

9·For this reason, the numerical simulation on the flow and heat transfer in engine water jacket becomes a principal method to optimum cooling system.

因此，内燃机水套冷却液流动数值模拟便逐渐成为目前研究内燃机水套冷却液流动、设计和优化水套结构的重要手段。

10·Structure performance: biological solid fermenter is composed by driving system, outer jacket, inner cylinder, heating, sterilization, cooling system and spraying device, etc.

结构性能： 生物固体发酵罐由传动系统、外夹套、内筒体、加热、灭菌、冷却系统、喷淋装置等几部分组成。