全部

1·If the axis sliding surface wears, available metal spraying method patching, then regrinds the light to the original diameter size.

如果密炼机的轴滑动面磨损，可用金属喷镀方法修补，然后再磨光至原直径尺寸。

2·Metal spraying is a key process of the manufacture of metalized film capacitors. The quality of metal spraying would affect directly the performance and the life of capacitors.

喷金是金属化薄膜电容器生产过程中的重要关键工艺，喷金质量的好坏直接影响着电容器的性能和寿命。

3·At the same time, the method that combines composite electroless plating with metal spraying mold making to increase the wear resistance and operating life of composite mold is also proposed.

同时提出，将化学复合镀与金属喷涂制模技术结合起来，可以提高复合材料模具的耐磨性及使用寿命。

4·Such aspects of gun height, particles and compressor air etc are studied based on the working principle of the metal spraying machine, and the methods of improving metal spraying quality is given.

基于喷金机的工作原理，对喷金距离、喷金颗粒、压缩空气等方面进行研究，并给出了提高喷金质量的方法。

5·Spraying must be washed clean appearance, there is oily wax with a agent oil, new welding or metal appearance except rust after use of epoxy resin antirust primer to prevent rust.

施喷外表必定要用水洗洁净，有油质，蜡质要用出有剂出油，新焊接或除铁锈后的金属外表要用——环氧树脂防锈底漆处理以防生锈。

6·This paper analyses the mechanism of corrosion and its prevention about metal gates, and expounds the application of thermal spraying in gates against erosion.

本文通过对金属闸门腐蚀机理和防腐机理的分析，阐述热喷涂工艺在水工闸门防腐中的应用。

7·Production process: after casting, extrusion, tinting, electrophoresis, powder coating, fluorine carbon spraying, mould, polishing, wood, metal wiredrawing, such extrusion.

生产工艺：经过熔铸、挤压、氧化着色、电泳、粉末喷涂、氟碳喷涂、模具、抛光、木纹、拉丝、钣金等挤压而成。

8·In addition, the metal body within welding heat effect zone will produce a lot of micro-cracks because of infiltration of solid solution nitrogen in course of porcelain spraying.

此外，喷瓷管道焊接热影响区的金属基体将由于喷瓷过程中渗入的固溶氮而产生大量微裂纹。

9·Spraying onto a red-hot surface in this fashion leads to a very marked improvement in adhesion of the resulting ceramic to the metal substrate.

用这种方式向红热表面上喷涂导致得到的陶瓷与 金属基底的粘结显著改善。

10·First of all, to deal with some spraying petrol, acetone for degreasing treatment with a file, fine sandpaper, oilstone will fatigue layer and oxide layer removed to expose the metal color.

首先应对喷涂部分用汽油、丙酮进行除油处理，用锉刀、细砂纸、油石将疲劳层和氧化层除掉，使其露出金属本色。