全部

1·Regulating pilot valve outlet pressure spring can be set.

调节导阀弹簧即可设定出口压力。

2·Low table by adjusting the outlet pressure control screw.

调节螺钉落在凸轮高点上。

3·The compressor - outlet pressure is nearly constant around the circumference.

压气机出口压力沿圆周方向接近于常数。

4·Detecting and displaying oil flow rate, oil temperature and purified oil outlet pressure.

数字显示通油流量、油温、净油出口压力。

5·Note: the outlet pressure is greater than the inlet pressure, the media will pass anti-wizard.

注：出口端压力大于进口端压力，介质会反向导通。

6·According to measured data, the variation of outlet pressure of building regulator is discussed.

根据实测数据探讨了楼栋调压器出口压力的波动情况。

7·Rotate button to the right to increase outlet pressure, rotation to the left to reduce the outlet pressure.

旋转钮向右为调高出口压力，向左旋转为调低出口压力。

8·Calculate the pressure difference by subtracting the desired outlet pressure from the maximum inlet pressure.

通过从最大进口压力减去所需要的出口压力来计算压差。

9·Calculate the pressure difference by subtracting the desired outlet pressure from the maximum inlet pressure.

基本平衡单阀座最大限度减小进口压力变化对输出压力的影响。

10·When turning gear from middle to maximum angle of steering gear, the suction and outlet pressure must be attention.

在将舵从中位转至最大舵角时应注意进，回油油路压力值。