全部

1·The micro fractures are firstly formed in roof above the working face.

研究表明：工作面上方采空区靠顶板侧岩层首先产生微裂隙。

2·With the use of the RE system, the working face of the lapel-shaper is reconstructed well.

运用设计的求逆系统初步实现了对翻领成型器工作曲面的求逆。

3·The water-inrush from floor inundates Working face 51101W in Liangzhuang coal mine, Xinwen Mining Group.

新汶矿业集团良庄煤矿51101W工作面因底板突水导致工作面被淹。

4·Scraper conveyor is the main conveying equipment in coal mine, has important affect to whole working face.

刮板输送机是煤矿生产的重要运输设备，对于整个工作面的安全生产起着至关重要的作用。

5·Either way, there's something very fundamental about having a normal working face that we need in our society.

不管是哪种原因，总之我们在社会上生存，拥有一张正常活动的面孔是非常重要的。

6·Its range had the larger outstand to outboard working face under the condition of injecting grouts in separate layers.

离层带注浆时的覆岩破坏形态和范围向工作面外侧突出较大。

7·This paper introduces the floor detection at 103 working face in Wolonghu Coal Mine by the parallel electrical survey system.

介绍应用并行电法采集系统，在卧龙湖矿井103工作面进行底板探测。

8·The temperature at underground working face is one of important factors that affect the selection of a mine ventilation design.

矿井井下气温高低是影响矿井通风方案选择的重要因素之一。

9·The side leading prospecting technique in underground working face is one of new underground galvanic resistivity prospecting techniques.

井下工作面侧帮超前探测技术是矿井直流电阻率探测新技术之一。

10·The bore sequence of every working face is random to the multi joint rock drilling manipulator, so the bore task planning is very complicated.

多关节凿岩机械手在工作时，完成的是一个在一定工作面上随机的钻孔孔序任务，其孔序规划相当复杂。

工作面

1·This paper introduces a method to solve optimum length of working face by Fuzzy Programming and Value Engineering Theory. Then an example with its analysis was given.

本文介绍了用模糊规划及价值工程理论求解最佳工作面长度的方法，并给出了算例，进行了结果分析。

2·The micro fractures are firstly formed in roof above the working face.

研究表明：工作面上方采空区靠顶板侧岩层首先产生微裂隙。

3·The author briefly introduces the principle, working face testing and application, effectiveness analysis and Suggestions on outburst control for high pressure grinding water jet technology.

作者简要介绍高压磨料水射流技术防突原理、工作面试验应用、效果分析及建议。

4·We can conclude that the method that unites lower-sect coal stack method and mobile drainage method is an effective measure in the control of gas in the working face of high gas mine.

由此得出，降段煤垛与移动抽放相结合的方法是高瓦斯矿井回采工作面瓦斯治理的有效方法。

5·The floor roadway should be located out of the abutment stress zone when protection coal pillar is retained, or the working face should be pushed away for enough distance under overhead mining.

留设保护煤柱时，底板岩巷应位于集中应力区的外侧或跨采时工作面应推过足够距离，使巷道靠近采空区应力恢复区的下方。