全部

1·The displacement of structure and the internal stress was given.

获得振动过程中结构的内力、位移等数据。

2·In this paper, measuring method of creep internal stress are studied.

对蠕变内应力的测试方法进行研究。

3·To remove internal stress such as those produced by drawing, bending, or welding.

去除内应力，如用冲压、完全或焊接成型的工件。

4·The internal stress of the joined materials was only several MPa according to the result of calculation.

应力计算结果得出焊接件中只有数兆帕的拉应力。

5·Moreover, the overall stability of structure depends on the accuracy of penetration depth and internal stress.

板桩墙的入土深度和内力是否准确关系到整个码头结构的稳定性。

6·Bearing parts in the process of hardening cooling by internal stress due to the formation of quenching cracks crack said.

轴承零件在淬火冷却过程中因内应力所形成的裂纹称淬火裂纹。

7·The hot strip local high points have very important influence on the internal stress distribution and thickness of cold strip.

热轧带钢局部高点对冷轧带钢板厚和内应力分布具有重要影响。

8·Yes, willpower can produce short-term change, but it creates constant internal stress because you haven't dealt with the root cause.

的确，意志力可以带来短期的改变，但因为你没有先处理问题的根源，结果反而引起内在持续的压力。

9·Residual stress is a internal stress that commonly exists in material, how to measure that is very concerned by many scientists.

残余应力是普遍存在于材料中的一种内应力，如何测定其分布，一直是国内外很多学者关注的问题。

10·After plating with heating except with 1% of the internal stress or plating of sedimentary can avoid this lead a characteristics.

电镀后用加热法除内应力或电镀时与1%的铅共沉积可避免这一特性。

内应力

1·After plating with heating except with 1% of the internal stress or plating of sedimentary can avoid this lead a characteristics.

电镀后用加热法除内应力或电镀时与1%的铅共沉积可避免这一特性。

2·Sensitivity index of external stress is only affected by sensitivity constant, while index of internal stress is affected by both sensitivity constant and porosity.

岩石的外应力敏感指数仅受敏感常数的影响，岩石的内应力指数受敏感常数和孔隙度的共同影响。

3·This paper analyses the process, characteristics and requirement of the lowering of the internal stress of the PC products in the moulding.

分析和指明了PC制品在注塑成型生产中各个方面降低制品内应力的工艺方法、特点及要求。

4·Variation and failure of the grinding ball of high chromium white cast iron during production and service are mainly caused by the internal stress.

内应力是造成高铬白口铸铁磨球在生产和服役过程中出现变异和失效的主要原因。

5·The aim of steel wire straightening is to maximally eliminate steel wire's extra internal stress caused by uneven deformation or uneven temperature distribution in production.

钢丝矫直的目的是最大限度地消除钢丝生产过程中由于变形或温度分布不均造成附加内应力。