全部

1·It can provide the strip with longitudinal tensile stress and transverse bending stress.

它可使被矫带材产生纵向拉伸应力和横向弯曲应力。

2·For the brittle ceramic materials, flexural strengths are determined by the stress at fracture in transverse bending tests.

对脆性陶瓷材料来说，抗弯强度即为横向弯曲试验中样品断裂时的应力。

3·Formula to compute nonlinear deflection at the top of the column subjected to both axial and transverse bending is then derived.

然后，推导出承受纵横弯曲塔身顶部的非线性变形计算公式。

4·Therefore, the horizontal linkages system reduced the effect of the longitudinal cracks on the positively symmetrical transverse bending mode frequency.

横向联系体的存在减小了纵向裂缝对横向正对称弯曲模态频率的影响。

5·General analytic solutions for transverse bending of anisotropic rectangular plate using first order shear deformation theory is obtained at the first time by the complex series method (CSM).

采用复级数方法首次建立了基于一阶剪切变形理论的各向异性矩形板横向弯曲一般解析解。

6·This paper solves problems of geometrically nonlinear bending of very flat and thin orthotropic shell under transverse load with least square method of collocation.

本文用最小二乘配置法求解正交异性极扁薄壳承受横向载荷作用下几何非线性弯曲问题。

7·Setting transverse diaphragm may remarkably increase the bending rigidity of the structure and improve its stress performance.

增设箱梁横隔板可以增大这种结构的横向抗弯刚度，改善其受力性能。

8·Followly, the bending rigidity and transverse shearing rigidity of one-way bamboo-stripe laminates applied to shipbuilding has been measured practically with this method.

用该方法实测了造船工业用的单向竹蔑积成胶合板的弯曲刚度与横向剪切刚度。

9·The atomic movement of the cantilever beam was motivated by transverse force on one end while another end was fixed, through which its bending deformation image was obtained.

通过一端固定另一端施加横向作用力驱使原子运动，得到纳米单晶铜悬臂梁弯曲的变形图。

10·The results indicated that transverse shear effect affects greatly on the bending properties of the plank while the ratio of span-height was small.

结果表明：在跨高比较小时，横向剪切效应对板的弯曲性能有显著影响；