全部

1·This paper emphatically analyzes key causes of over tolerences of strip width.

本文着重分析了带钢宽度超差的主要原因。

2·According to the aluminum strip width easily adjust the distance of two rubber mouth, up to 25 mm (optional).

根据铝条宽度轻松调节两个胶嘴的距离，可达25 mm(选配)。-液压可启动双路系统确保稳定性能。

3·Each test strip width should be sufficient to reflect to the gem business card printing and membership card making.

每一尝试带的宽度答不足反响欲查察的制卡和会员卡制息成果。

4·With the increasing of strip width, the transverse difference of front tension stress decreases firstly, and then increases.

随着板宽的增加，前张应力沿横向的差距先减小后增大。

5·ON-line measurements of slab width during continuous casting and strip width as well as flatness during rolling are important.

连续铸造中板坯宽度和轧制过程中带钢宽度及平坦度的在线测量非常重要。

6·A new work roll contour is advanced which is a linear variable crown (LVC) roll. This roll contour can realize linear ratio of gap crown and strip width.

提出一种新型线性变凸度工作辊辊型即lvc辊型，这种辊型实现了辊缝凸度调节与板宽成线性化。

7·The cause of strip width shrink (SWS) during hot continuous rolling is analyzed. A method to calculate SWS ratio is provided, some approaches for SWS reduction are discussed.

分析了窄带钢热连轧过程宽度拉缩的原因，给出了计算宽度拉缩率的方法，探讨了减少宽度拉缩的技术途径。

8·According to process parameters given by level 2 model, TCS system changes gap opening of vertical edging rolls to control strip width through feed forward and feedback technology.

通过前馈和反馈技术，TCS按照二级模型给出的工艺参数实时变换立辊开口度来控制带钢的宽度。

9·For width of carbon steel, problem of strip head and tail width narrowing was solved effectively through optimizing adjustment of model parameter, and strip width accuracy was improved.

本文就碳钢的宽度而言，针对带钢头尾宽度拉窄的现象，通过对模型相关参数的优化调整，有效解决了头尾宽度拉窄的问题，提高了带钢的宽度精度。

10·LVC (Liner Variable contour) is a new type of work roll contour. Gap crown can linearly vary with strip width by use of the contour and strip shape performance can be adjusted through shifting.

工作辊辊型是一种新型辊型，这种辊型实现了辊缝凸度随板宽变化成线性变化，并可以通过窜辊来调节板形性能。