全部

1·These are to form the reticulate structure inside company site.

这些都是为了形成企业站点内的网状结构。

2·Surface crack includes horizontal, vertical and reticulate crack.

表面裂纹又分为横向裂纹、竖向裂纹和网状裂纹。

3·A case of reticulate pigmented anomaly of the flexures is reported.

报告1例皱褶部网状色素异常症。

4·The reticulate pattern of minor veins is characteristic of most dicotyledonous plants.

细脉的网状式样是双子叶植物的主要特征。

5·This photo shows only the carapace, with their distinctive reticulate surface ornamentation.

这张照片显示，只有在胸甲，其独特的网状面装饰品。

6·Reticulate red clay is familiar in construction of geotechnical engineering around Dongting Lake.

网纹红土是洞庭湖地区岩土工程施工中常见的土体。

7·Mortar theory assumes that asphalt mixture is a dispersed system of multilevel interspace reticulate structure.

胶浆理论认为沥青混合料是一种多级空间网状结构的分散系。

8·Usually, layer and vertical crack are caused by moulding, and horizontal and reticulate crack are caused by sintering.

通常层裂和竖向裂纹是机压所致，横向裂纹和网状裂纹是烧成造成的。

9·Meanwhile, 3d reticulate structure was more homogeneous, and tensile strength and elongation has been enhanced greatly.

泡沫镍的三维网络结构更加均匀，抗拉强度、延伸率大大提高。

10·The most of the surface ornamentation is compound and may be divided into three types under SEM: (1)Reticulate—verrucate.

根据纹饰特点的不同，可分为三种类型：（1）网——瘤状复合纹饰；

网状的

1·This photo shows only the carapace, with their distinctive reticulate surface ornamentation.

这张照片显示，只有在胸甲，其独特的网状面装饰品。

2·These are to form the reticulate structure inside company site.

这些都是为了形成企业站点内的网状结构。

3·Usually, layer and vertical crack are caused by moulding, and horizontal and reticulate crack are caused by sintering.

通常层裂和竖向裂纹是机压所致，横向裂纹和网状裂纹是烧成造成的。

4·The form of the perforation plates in the typical vessels are various, divide into several subtypes:scalariform perforation plates, reticulate perforation plates.

在导管分子中，存在着梯状穿孔板、网状穿孔板、混合型穿孔板和单穿孔板；

5·The results show that 82b wire rod brittle fracture is mainly caused by excessive inclusion, reticulate carbide, lower sorbite in the microstructure, and surface defect of wire rod.

结果表明，82 B钢盘条脆断的主要原因是夹杂物级别超标、组织中出现网状碳化物、索氏体含量偏低以及盘条表面缺陷等。