全部

1·The design parameters and the calculating method of the slab thickness were given.

确定了结构设计参数及路面板厚度计算方法。

2·Airport cement concrete pavement structural parameters include slab thickness, concrete bending strength elastic modulus and foundation reaction module.

机场水泥混凝土道面结构参数包括板厚、混凝土弯拉强度和弯拉弹性模量、地基反应模量。

3·It also can be concluded that reduction efficiency was influenced by slab thickness greatly, and slab width and steel grade have little effect on reduction efficiency.

板坯宽度与钢种对压下效率的影响较小，板坯厚度对压下效率的影响大。

4·AX-100L Slab Thickness Machine is adopted gantry linkage structure, autofeed driven by trolly screw mandrel and America EMERSON transducer to adjust the speed steplessly.

AX-100L大板定厚机采用龙门式连体结构，台车丝杆驱动自动走刀，并采用美国爱默生变频器可进行无极高速。

5·In the soft reduction control process, the slab thickness and drafts can be controlled by the hydraulic system through controlling the inlet and outlet gaps of each segment.

在扇形段轻压下控制中，通过对每个扇形段的入口侧和出口侧的两端辊子的辊缝进行控制，实现对板坯厚度及压下程度的控制，其控制是由液压系统来完成的。

6·The propagation constant increases with decreasing slab thickness for the first-order oscillating mode, which is different from that in traditional metal-cladding waveguides.

一阶振荡导模的传播常数随着平板厚度的减小而增加，此性质与传统的金属包覆波导不同。

7·The uniformity of deformation during hot rolling could be improved by properly increasing the slab thickness and adopting large reduction rate in first several rolling passes.

适量增加铸坯厚度，并在较靠前的机架分配较大的压下量有利于提高轧制过程的应变均匀性。

8·The results show that the openness and shape of funnel mold are critical for formation of longitudinal cracking. The optimized funnel shape has relation to the slab thickness.

结果表明：漏斗型结晶器的开口度和漏斗曲线对纵裂的形成有重要影响，漏斗曲线的优化与铸坯出口厚度有关。

9·T he relation of the four parameters with initial slab thickness, initial slab width, width reduction and edger roll diameter was obtained and a new mathematical model was accomplished as well.

得出表征立轧时轧件断面特征的四个参量与侧压量、立辊直径、板坯来料厚度及宽度间的关系，并建立了新的数学模型。

10·The parameters of the optical slab glass waveguide (refractive index and thickness of thin film) were measured by a new technique for using the prism coupler, i. e., leaky mode method.

由使用棱镜耦合器的一种新技术即漏模法，测量了平板玻璃光波导的参数(薄膜的折射率和厚度)。