全部

1·The step matrix of spline function is derived.

文中导出了样条函数步长矩阵。

2·It also lets you bend the objects along the spline.

它也可以让你沿着弯曲的样条对象。

3·The spline shafts is a important part of the machine.

花键轴是机械中广泛使用的重要零件之一。

4·Internal spline is a spline formed on the inner surface of a cylinder.

内花键：内花键是在圆柱体的孔的内表面形成的花键。

5·This paper is presented a spline boundary element Method on elasticity.

本文对弹性力学问题提出一个样条边界元法。

6·The first and each subsequent Bezier spline requires only three points.

第一条和后面的每一条贝塞尔曲线只需要三个点。

7·The thesis simulates the process of the spline forming by the FEM software.

应用有限元分析软件，对花键轴的齿形成形过程进行模拟。

8·This method draws a cardinal spline that passes through each point in the array.

此方法绘制经过数组中每个点的基数样条。

9·I made a simple blueprint setup from these images and started to build a spline cage.

我以这些图像为基础制作了一个简单的蓝图并且开始构建曲线框架。

10·This is the method of calculating it, and spline interpolation code, you can refer to.

这是计算方法里面的，样条插值代码，大家可以参考一下。

样条

1·Johannes Kopf from Microsoft and Dani Lischinski from the Hebrew University built the algorithm by blending a number of approaches, including pixel analysis and spline curves.

来自微软的约翰·内斯科夫和希伯来大学的达尼·里奇斯开发了这个混合多个方法的算法，包括像素分析和样条曲线。

2·The computer calculates the inbetweens values based on a spline curve connecting the keyframe values.

然后计算机基于样条曲线计算出连接关键帧数值的中间画的数值。

3·In the common methods, the algorithm based on the average of region gray makes image blur, and the algorithm based on spline interpolation wastes time.

在常用的方法中，基于区域灰度平均的算法使图像模糊，而基于样条插值的算法计算耗时。

4·Regressions incorporating the economic/financial variables as well as a linear spline in time variable are set up for testing the externality series.

回归纳入经济/金融变量以及线性样条在时间变量的设置进行测试的外部系列。

5·The strength is calculated by the transfer matrix method and stability is computed by spline energy method.

强度分析采用迁移矩阵法，稳定性分析采用样条能量法。

花键

1·This paper gives a calculating method of the error of rectangle spline hob profile designed on the theory of plane engagement, with the errors of some hobs calculated.

此文给出了按平面啮合原理设计矩形花键滚刀齿形的误差计算方法，并计算了几种规格的滚刀的齿形误差。

2·The sample of spline coated with nylon was made through electrostatic spraying, and the jack horse and road running test was also carried out.

采用静电喷涂法制得尼龙涂覆花键样品，并进行了台架和道路行驶试验。

3·But because of the elasticity recovery of metal in rolling manufacturing procedure, the gear form and precision of the spline are influenced.

但是在冷滚轧加工过程中，金属的弹性恢复对花键的最终尺寸精度以及齿形质量有一定的影响。

4·The paper introduces a way of measuring the deflection involute spline, and the calculation of diameter and distance of the measuring bar.

介绍了用量棒检测变位渐开线花键的方法，以及量棒直径、跨棒距、棒间距的计算方法和公式。

5·Based on basic theory of maximum error minimum method, double arc parameters for normal tooth outline in rectangle spline hob are optimized to obtain tooth outline in workpiece with minimum error.

根据最大误差最小法的基本原埋，对矩形花键滚刀法向齿形的双圆弧参数进行了优化，使滚刀加工出的工件齿形误差最小。

齿条

1·A bolt assembly for which the spline end remains is considered to be under-tightened.

齿条端未脱落的螺栓组件视为未紧固组件。

(1)cubic spline三次样条；三次样条曲线（线图）；三次仿样函数

(1)spline function样条函数

(1)spline interpolation样条插值，样条内插；仿样内插法

(1)involute spline渐开线花键

(1)spline shaft花键轴；多槽轴；有齿轴

(1)internal spline内花键；内齿槽