全部

1·Dimension line with label that automatically changes to match length.

带自动匹配长度的标签的尺寸线。

2·Dimension line with label that automatically changes to match length. Text position and extension lines are adjustable.

带自动匹配长度的标签的尺寸线。文本位置和延长线是可调整的。

3·If the element being tested with tolerance requirements is an axis, centre line or symmetrical plane, the arrow and datum symbol should be aligned to the dimension line of that element.

当被测要素为轴线、中心线或对称平面时，指引线的箭头和基准符号应与该要素的尺寸线对齐。

4·After the subroutine parameter is given the origin number, the plotter controlled by computer can draw out automatically extension line, dimension line, arrowhead and write dimension figures.

当给子程序的参数赋以初值后，由计算机控制自动绘图机绘制出尺寸界线、尺寸线、箭头和注写尺寸数字。

5·If the element being tested with a tolerance requirement is a contour line or surface, point the arrow and datum symbol to the contour line or surface, and keep it away from the dimension line.

当具有公差要求的被测要素为线或平面时，将指引线箭头和基准符号指在线或平面上，且必须与尺寸线错开。

6·You will be able to modify some of the specifications such as the range and type of chart (bar or line, stacked or clustered), color and pattern choices, breakdown dimension and tooltips.

您还可以修改一些规范，比如图表的范围和类型(条形图或线形图，层叠图或聚类图)、颜色和模式选项、细分维度和工具提示。

7·Drag to add a dimension to an arc or circle. Place line end at arc center, and yellow diamond on arc.

通过拖动可向弧或圆添加尺寸。将线端放在弧中心上，并将黄色的菱形放在弧线上。

8·The infection of the dimension of microstrip line to power capability of devices and the power capability of isolate resistor has been investigated in detail.

详细研究了微带线尺寸对器件功率容量的影响，以及大功率合成系统中隔离电阻功率容量的量值；

9·Ensure the dimension compressing from the free state to broken line.

应保证从自然状态压缩到虚线位置时的尺寸。

10·If there is any mistake in the position, dimension of height mark or reference line of the construction, the contractor shall amended it during construction.

在工程施工过程中，如果工程的位置、标高尺寸或准线出现错误，承包商应修正上述错误。