全部

1·I got a ding in my rear fender.

我汽车后面的挡泥板撞瘪了一处。《牛津词典》

2·Todd sat on the front fender, his legs dangling toward the ground.

托德坐在前挡泥板上，双腿耷拉晃荡着。《柯林斯英汉双解大词典》

3·Advance package models include further noise reduction using a thicker carpet base layer and front fender liners.

先进的包装模式包括进一步降低噪音使用更厚的地毯基层和前挡泥板衬垫。

4·Remove the fender lower screws.

拆下挡泥板下螺丝。

5·Blood. On the front left fender.

血迹。左前轮的挡泥板上。

6·How did Locus Fender lose his arm?

卢卡斯·范德的胳膊是怎么丢掉的？

7·The impact dented our car's fender.

碰撞把我们汽车挡泥板给撞凹下去了。

8·No, no fender on berth.

不，泊位上无碰垫。

9·His car bruised the auto fender of my car.

他的汽车撞瘪了我的汽车挡泥板。

10·Finally I lit a cigarette and flopped over the fender mat.

最后，我点了一支香烟，瘫坐在挡泥板垫上。

挡泥板

1·I got a ding in my rear fender.

我汽车后面的挡泥板撞瘪了一处。《牛津词典》

2·Todd sat on the front fender, his legs dangling toward the ground.

托德坐在前挡泥板上，双腿耷拉晃荡着。《柯林斯英汉双解大词典》

3·Advance package models include further noise reduction using a thicker carpet base layer and front fender liners.

先进的包装模式包括进一步降低噪音使用更厚的地毯基层和前挡泥板衬垫。

4·A couple of screwdrivers rolled off my fender mat onto the floor.

两支螺丝刀从我的挡泥板垫上滚到了地板上。

5·Finally I lit a cigarette and flopped over the fender mat.

最后，我点了一支香烟，瘫坐在挡泥板垫上。

护舷

1·Calculation of effective impact energy by vessel's berthing and fender design are important contents of wharf engineering design.

船舶靠泊有效撞击能量计算和护舷设计是码头工程设计中的重要内容。

2·Combining an engineering case, this paper introduces the feasibility and construction technology of installation of rubber fender underwater using undiffused cement mortar.

结合实际工程，简介采用不扩散水泥砂浆水下安装橡胶护舷的可行性及施工工艺。

3·The capability of the collision avoidance can be strengthened by improving the performance of the rubber fender and the maximum strength of the offload platform.

通过改善橡胶护舷的性能和增强卸载平台的最大承载能力，可提高系统的避碰能力。

4·This paper describes design procedure of weight chains for SUC Rubber Fender Such as Selection and lay -out of weight chains , calculation method of Tension on weight chains etc .

阐述了SUC橡胶护舷重力链的设计方法，其中包括重力链的布置、选择及重力链张力的计算方法等。

5·Prevent fender system from shear deflection.

防止护舷系统剪切变形。

翼子板

1·For rotational molded truck fender, raw material, processing conditions and the design of part and mold were studied.

对卡车翼子板滚塑成型原料、工艺条件、制件和模具设计进行了研究。

2·The experimental part design of rotationally molded truck fender was studied by combining theory analysis, experimental part design and experiment.

采用理论分析、试验制品设计与实验结合的研究方法，研究卡车翼子板旋转模塑成型试验制品设计问题。

3·A vehicle body includes a fender and a headlamp assembly.

一种车身，包括翼子板和前灯组件。

4·A camera calibration method was put forward and applied to non-contacting detection for the front fender of a car.

提出了一种摄像机标定方法并应用于某轿车翼子板的非接触检测。

(1)front fender前叶子板，前护盖

(1)rubber fender橡皮挡泥板；橡胶防冲垫；橡胶护垫

(1)fender bender轻微交通事故；撞弯保险杠的车祸（等于小车祸）