全部

1·The dimension of contact region is measured by means of stamp method.

接触区尺寸采用印痕法测量。

2·An algorithm to deal with the moving of the contact boundary on a large possible contact region is presented.

还提出了一种处理接触边界在很长的可能接触区上移动的算法。

3·Because the boundary of contact region cannot be determined in advance, these equations are weak nonlinear ones.

因接触区的边界预先不能定出，故这组方程为弱非线性方程。

4·The numerical results of shear stress intensity factor and the length of the crack face contact region are given.

给出了剪切应力强度因子和裂纹面接触区尺寸的数值结果。

5·It is emphasized to the moving and rolling contact of 3d elastic bodies with hole-type defect in the vicinity of contact region.

这些算例着重于在接触区附近有孔洞型缺陷的三维弹性体的移动接触。

6·It is emphasized to the moving and rolling contact of 2d elastic bodies with hole-type defect or crack in the vicinity of contact region.

这些算例着重与在接触区附近有孔洞型缺陷或裂纹的二维弹性体的移动和滚动接触。

7·A simple and practical method was proposed to simulate the contact region and the contact pressure between the prestressed tendon and the wall of ropeway.

根据试验观察，提出了一种模拟预应力钢索与索道孔壁接触区域和接触压力的简单、实用的方法。

8·The axial stress on the steel tube which appears on the contact region of the steel tube and mandril is larger than the radial and circumferential stress.

钢管周向和径向的应力值不大，而轴向应力值较大，最大轴向应力出现在钢管与芯模的接触部位。

9·Separation solution is, in kind, similar to the flexibility method but, contrary, considers the influence of traction on the displacement in the vicinity of the contact region.

分离解法在种类上类似于柔度法，但在接触区附近考虑面力对位移的影响。

10·In addition, an imagination of using the reverse setting of oil seal to produce the microleakage inord er to make clean the lip contact region using in the agricultural construction Mach...

此外，对农业工程机械中的密封提出反装油封产生微泄漏，以形成对唇口接触区域清洗作用的设想。