全部

1·Hole forming by the way of nickel deposit onto the copper cathode.

在这个工艺中， 镍沉积在铜质的 阴 极心上以形成开孔。

2·Complete assemblies are furnished with drives and high capacity copper cathode contacts.

该电镀滚筒装备完整，配备有驱动装置和高容量铜阴极接点。

3·Measurement - Length, Width and Thickness of the Copper Cathode Plates shall be that of the LME Standard, Internationally accepted measurement.

电解铜长度、宽度及厚度应符合LME标准及国际间可接受的尺寸。

4·The single potential method was adopted to study the electrocrystallization of Sb on the copper cathode from aqueous citric acid and potassium citrate bath.

采用电位阶跃法研究了铜基体上柠檬酸及其钾盐的缓冲溶液中锑的电结晶过程。

5·The results indicated that direct reduction of nitrobenzene took place on copper cathode, i. e. the typical catalyzed iron inner-electrolysis characteristics.

结果表明，硝基苯能在铜电极上直接发生得电子还原反应，此即催化铁内电解法反应机理的显著特点。

6·In the process of copper electrolysis by the traditional method, good stating sheet product is a major premise and basis for producing copper cathode of high quality.

在传统法铜电解工艺中，种板系统生产出好的始极片是生产高品质阴极铜的重要前提和基础。

7·It also describes the result of bismuth removal, and points out the technical measurement to reduce effect of bi on copper cathode quality and the necessity and method to set up bi removal step.

评述了提高脱铋效果，降低铋对阴极铜质量影响的技术措施；指出建立脱铋工序的必要性及途径。

8·By running an electrical current through the cell, using an ordinary battery charger, the copper in the anode (and in the pins) dissolves and is deposited on the lead cathode.

要想让电流通过电解池，你需要一个普通的电池充电器。阳极和针脚里的铜溶解之后会聚集在阴极上。

9·In the simplest case, the anode would be one metal, perhaps iron, the cathode another, say copper, and the electrolyte might or might not have the same composition at both electrodes.

在最简单的情形下，阳极是一种金属如铁，阴极是另一种金属如铜，在两个电极处的电解质可能有相同的组成或不相同的组成。

10·A discharge model on the sputtering hollow cathode discharge (SHCD) copper ion laser is established, its characteristics of discharge, sputtering and the particle interaction processes are analysed.

本文祥细分析了溅射型空心阴极放电(SHCD)铜离子激光器的放电、溅射特性和粒子的相互作用过程，建立了放电模型。