全部

1·The balancing process is composed of pre balancing and field balancing.

平衡过程由预平衡和现场动平衡两个步骤构成。

2·Finally, in the balancing test rig and the project site, the field balancing test system was use to balancing the rotor and was fully tested.

最后，分别在转子动平衡实验台和工程现场中，使用开发的现场动平衡测试系统对转子进行平衡，对系统进行全面测试。

3·In practical balancing, quick field balancing can make the residual unbalance decrease to less than 5% of original unbalance in several minutes.

可在数分钟内使转子的残余不平衡量降低至原始不平衡量的5％以下。

4·With the measured ratio and lagging Angle, in the process of field balancing for high speed grinding, the rotor system can attain quick balance just adding balancing mass one time.

利用测出的比例常数和滞后角，对高速磨削过程中出现的不平衡振动，可实现转子系统一次试加重的快速动平衡。

5·By use of pocket DD vibration meter, both filed balancing of shafting of new unit and field balancing of unit with vibration troubles after operation for some time can be conducted.

用袖珍数显测振表可以对新安装机组进行轴系平衡，也可以对运行一段时间发生振动故障的机组进行现场平衡。

6·Furthermore, a corresponding rotor field dynamic balancing module was developed and integrated into Predictive Maintenance Studio 2000 (PMS2000).

开发相应的转子现场动平衡软件模块，集成到“PMS2000设备预知维修与故障诊断系统”。

7·The intellectual instrument for field whole machine balancing is a whole machine balancing equipment by measuring the phase and amplitude.

现场智能整机动平衡仪是一种通过测相测幅进行整机动平衡的装置。

8·The flash frequency instrument for field whole machine balancing is a whole machine balancing equipment by measuring the phase and amplitude.

闪频式现场整机动平衡仪是一种通过测相测幅进行整机动平衡的装置。

9·Through analysis and solves the vibration problems of two uprating units, the process of multi plane field dynamic balancing are studied.

对两台改造机组的异常振动故障进行了分析和现场处理，探讨了运用多平面综合平衡法解决该类振动问题的途径。

10·The paper prospected its application in designing the intelligence field overall machine dynamic balancing instruments for the rotating machinery.

该方法可用于智能化旋转机械整机现场动平衡仪开发。