全部

1·Affix using one of the crank arm fixing bolts.

词缀使用其中的一个曲柄臂固定螺栓。

2·Each piston has a crank arm attached to a crankshaft.

每个活塞有曲柄连接曲轴臂。

3·They sit pretty close to the crank arm and we've been quite pleased with them so far.

他们坐在非常接近曲柄，我们已经对他们相当满意为止。

4·To power the machine, several people would turn a crank arm connected to the vacuum pump.

要操作此机器，需要几个人转动与真空泵相连的曲柄装置。

5·Dial gauge with universal dial gauge bracket must be screwed to the cylinder block and placed against the crank arm.

百分表及通用百分表托架必须通过螺钉固定在气缸体上，位置与曲轴臂相对。

6·Turn the wiper module over and remove the nut that secures the wiper motor crank arm to the wiper motor output shaft.

转动雨刷模组盖，并拆下将雨刷马达曲柄臂固定于雨刷马达输出轴上的螺帽。

7·The utility model is composed of a land wheel, a driving pin, a driving crank arm, a driving inserted link, a release spring, and a driving ratchet.

它由地轮、传动销、传动拐臂、传动插杆、回位弹簧和传动棘轮组成。

8·Abstract: Fracture failure of junction crank arm of external cylinder retraction-extension actuator of landing gear of Y-7 aircraft is analyzed in this paper.

对运七飞机起落架外筒收放作动筒连接摇臂的断裂损伤失效进行了分析。

9·Aim to the serious subfilling of the crank arm, the construction ofconstrained wingwas presented to form the favorable die filling instead of increasing the forging size.

提出“约束翼”新型结构，对曲柄臂严重缺料的情况下，在不增加锻件的下料尺寸，成形质量良好的曲轴锻件；

10·The crankshafts shown in Fig 1-4 is actually made up of various parts such as main bearing journals, rod journal, crank arm, bearing, counter balanced weight and flywheel end.

在图1-4中，曲轴实际上由以下不同的部分组成，它们分别是：主轴承轴颈、连杆轴颈、曲轴臂、轴承、平衡配量（？）以及飞轮端。