全部

1·A new kind of hydraulic high-speed on-off valve with giant magnetostrictive actuator and cone valve structure is presented.

介绍了一种新型的液压高速开关阀，它采用了超磁致伸缩驱动器和锥体式阀芯结构。

2·After the Kongdong reservoir water hole plate gate rebuild into a cone valve, the stilling basin, model test was conducted.

对崆峒水库输水洞平板闸门改建为锥形阀后的消力池进行了模型试验研究。

3·The hydraulic cartridge cone valve is chosen for the study of possibility to explore its effects of geometry parameters and boundary condition on flow field and cavitation of cone valve.

以插装型液压锥阀为研究对象，研究了几何结构参数及边界条件对锥阀流场及气穴现象的影响。

4·It can be concluded that cavitation of hydraulic cartridge cone valve is reduced by increasing the opening stroke and the outlet pressure and changing the geometrical structure of valve spool.

研究表明：增大阀口开度，增大出口压力，并对阀芯结构进行修改后，插装型液压锥阀阀口气穴现象均可有效减弱。

5·Compared with the experimental data, the simulating results show that the proposed model is reliable and can be applied to the numerical simulation of turbulence flow around the fixed-cone valve.

数值模拟结果与试验资料的比较分析表明两者吻合较好，从而验证了该模型在锥阀湍流模拟中的可靠性。

6·Medium pressure increases toward the valve seat surface and oblique cone sealing surface squeeze is tightening, sealing the better.

正向介质压力增大时阀板斜圆锥表面与阀座密封面挤压越紧，密封效果越好。

7·Medium pressure increases toward the valve seat surface and oblique cone sealing surface squeezed more tightly, sealing the better.

正向介质压力增大时阀板斜圆锥表面与阀座密封面挤压越紧，密封效果越好。

8·Along with the standard Red Valve sleeve, we offer Double Wall (DW), Reduced Port (RP), and Cone sleeves for special applications.

作为美国红阀公司的标准配置，我们可以提供双层(DW)，缩小流道(RP)，以及锥形套管以满足特殊需求。

9·Cone air lock valve can realize to discharge dust with the help of torque balance.

锥形锁风阀利用力矩平衡的方法实现卸灰。

10·Fluid control one-way valve used cone disc, sealed a good performance.

液控单向阀采用锥形阀芯，因此密封性能好。