全部

1·Reinforcing ring is used to improve the anti-crushing strength o…

采取加强圈的措施来提高管线和桶体设备的抗外压强度。

2·The porosity, bulk density and cold crushing strength of the refractory samples were determined.

讨论了气孔率、体积密度和常温耐压强度与电熔氧化镁加入量之间的关系。

3·For extrudates there are side crushing strength tests, bulk crushing strength tests, abrasion tests.

对挤条产品有侧压强度的测试，堆积强度测试和耐磨测试。

4·The turbulence kinetic energy and crushing strength is increased with the increasing of squish area.

适当增大挤气面积，可增大逆挤流强度，提高缸内湍流动能，促进火焰传播。

5·Reinforcing ring is used to improve the anti-crushing strength of the pipeline and barrel-shaped equipment.

采取加强圈的措施来提高管线和桶体设备的抗外压强度。

6·FOR a particular use, we should consider the texture, the crushing strength, and the chemical composition of the material.

为特定用途选择耐火材料时，要考虑其质地、抗碎强度和成分。

7·The influence of green ball quality and palletizing crushing strength are studied by using different size distribution of DAYE concentrate.

研究了不同的粒度组成大冶铁精矿对生球质量与成品球团抗压强度的影响。

8·In selecting a refractory FOR a particular use, we should consider the texture, the crushing strength, and the chemical composition of the material.

为特定用途选择耐火材料时，要考虑其质地、抗碎强度和成分。

9·Influence preparation of parameters on crushing strength of the support for residue oil hydrodemetalation catalysts was investigated through experiments.

本文通过实验，探讨了制备条件对渣油加氢脱金属催化剂载体机械强度的影响。

10·Development tendency of mechanical properties is: density increase oil content ratio decreases, Brinall hardness increases, crushing strength goes down first and then goes up.

机械性能的变化趋势是：密度增加，含油率下降，布氏硬度增加，而压溃强度先降低后增加。