全部

1·At present stripping rib rolling straight thread is the most advanced technology of reinforced connections.

当前剥肋滚轧直螺纹是最先进的钢筋连接技术。

2·The workmanship and operation flow of the punching straight thread joint is introduced, including the process in a factory.

介绍了镦粗直螺纹接头的工艺和流程以及工厂化加工过程。

3·It applies the concrete anchoring of rolling straight thread sleeve-type anchor block, which makes construction convenient and anchoring reliable.

用滚压直螺纹套筒作锚固块的钢筋锚固形式，施工便捷，锚固可靠。

4·As a new advanced connection mode, reinforced bar connection technology is a key procedure in building construction, especially for straight thread connection of large-diameter reinforced bar.

钢筋连接尤其是粗直径钢筋连接在建筑施工中是一项关键工序，而钢筋直螺纹连接技术是一种先进的新型连接方式。

5·It turns out that the weightless thread version runs for slightly more than twice as long as the straight loop version — a little less than 3 seconds versus just over 6 on the mentioned machine.

结果表明，在直接循环的版本运行一次的时间内，轻便线程的版本运行了两次还多一点点—也就相当于在上面提到的机器上，轻便线程运行了不到3秒，而直接循环运行了超过6秒。

6·Elongate your spine as if a thread extending from the top of your crown was pulling your head, neck and back straight up towards the sky.

伸展你的脊柱，好像有一根线从头顶直直的往上拉你的头，脖子和后背。

7·Creative use thread type glass sealing hole instead of existing straight pillar and steps type glass sealing hole, the product compression resistance and leakage performance increase 1 times.

创造性的采用“螺纹型”玻璃封接孔代替现有的“直柱型”和“台阶型”玻璃封接孔，产品耐压和耐泄漏性能相应提高1倍。

8·It's very difficult to keep two problems straight and who's working on what in a single thread.

这是非常难以保持连续两个问题，谁的工作在一个单独的线程。

9·The internal thread comes within the broad definition of an internal undercut in that the thread forms a restriction which prevents the straight draw removal of the molding from the core.

因为内螺纹构成约束它阻碍零件从型芯的直接脱模所以内螺纹在内凹孔的广义范围内。

10·When a carpenter is about to plane or saw a piece of timber he draws a straight line using a thread .

当一个木匠要刨平或锯一块木材时，他以墨线画一条直线。