全部

1·Worn teeth on ring gear or drive pinion gear.

环形齿轮或驱动小齿轮上齿磨损。

2·Worn teeth on ring gear or drive pinion gear.

根据齿轮啮合原理，建立了轮齿的精确齿形。

3·Use hammer and brass drift to tap ring gear onto the flywheel.

用锤子和黄铜冲销轻轻敲打环齿轮进入飞轮。

4·Note that the input pinion is a smaller gear than the ring gear.

注意到主动齿轮的齿数比冠状齿轮少。

5·Push and hold ring gear upward while not allowing the pinion gear to rotate.

当不准许主动齿轮旋转时，向上推环齿轮，并放牢它。

6·This dissertation is aimed to design a new product series for three-ring gear reducer.

本文旨在设计新的三环减速器产品系列。

7·The ring gear turns the entire differential case because it is bolted solidly to the case.

由于从动锥齿轮和差速器壳体紧紧螺栓固定在一起，从动锥齿轮驱动整个差速器壳体。

8·The ingenuity lies in the fact that the ring gear is displaced in relation to the sun wheels.

在独创性在于该齿环是相对于太阳的车轮流离失所者的事实。

9·Planetary-stage gear is mainly composed of sun wheel, planetary gear, internal ring gear, etc.

行星级齿轮传动主要由太阳轮、行星轮、内齿圈等组成。

10·The drive pinion is meshed with a large ring gear so that the ring gear revolves with the pinion.

传动齿轮与一个很大的冠状齿轮啮合，传动齿轮驱动冠状齿轮。