全部

1·The emphasis is placed on the predictions of the heat transfer rate on the wall.

计算的重点放在壁面热流率的预测。

2·The experiments show that the heat transfer rate in the porous bed is mainly influenced by…

实验表明，多孔物料床的沸腾换热强度主要受到颗粒—液体组合的影响。

3·Additionally, it can only apply to one layer insulation and cannot predict the heat transfer rate after insulation.

此外，只能限于包一层隔热材和无法对隔热材包覆后之散热率之作正确估算。

4·The oil flow rate distribution curve mainly has an S shape, and the heat transfer rate shows a bathtub distribution.

油冷器各层芯片流量分配曲线大致呈S形分布，而换热量分配曲线呈浴盆状分布。

5·Usually, it also causes the wall heat transfer rate to decrease somewhat in the region downstream from the point of separation.

通常，它也会使分离点下游区间内的壁热交换率有所减少。

6·It is a new technology to sinter ceramic materials rapidly by means of the high temperature and high heat transfer rate of plasma.

利用等离子体的高温和高传热率快速烧结陶瓷材料是一项新技术。

7·Relationship of heat transfer rate and filling rate is obtained, as well as the relationship of velocity and inner diameter, filling rate.

最后，对脉动热管的传热规律作了初步分析，得出了传热性能与充液率的关系，以及运行速度与管径，充液率的关系。

8·Numerical results indicate that there is an optimum mass fraction of multiple PCMs for the LTES system to reach the maximum heat transfer rate.

数值结果表明，存在一个最佳的质量分数的多个为LTES系统的相变材料来达到最大的热传递率。

9·And the relations between heat transfer rate and charging ratio, cooling, method, relative position of heating end and cooling end etc was investigated;

研究了其传热性能与充液率，冷却方式，加热端与冷却端相对位置等各种因素的关系；

10·It is analyzed that the thermal and chemical model have a effect on the shock detached distance, heat transfer rate, the distributions of temperature and density.

分析了各种气体模型对激波脱体距离、壁面热流、温度分布和密度分布等的影响。