全部

1·On the basis of experiment study, the characteristics of sediment flow aerated artificially in a outlet structure are discussed in this paper.

本文在试验研究的基础上，探讨了在泄洪排沙建筑物中采用挑坎等人工掺气设施后的浑水掺气特性。

2·The outer furnace wall between the two grates is equipped with a gasification gas outlet pipe, namely utilizing a bottom gas outlet structure.

两炉箅中间的外炉壁上设有气化燃气出气管，既采用下出气结构；

3·The gas reducing valve outlet structure comprises a gas piping connected on an air outlet, the gas piping is connected with the air outlet through a quick joint.

该气体减压阀的出口结构包括连接在出气口上的输气管，所述输气管通过快速接头与出气口连接。

4·Therefore, study on the hydraulic characteristics of spillway, especially on aerated flow, becomes more and more important for safe operation of outlet structure.

因此，开展溢洪道水力特性，特别是掺气水流特性的研究对泄水建筑物的安全运行具有重要的现实意义。

5·Our company produce odor filter is mainly used for oil tank outlet, simple structure, low cost, is an ideal choice for your material.

我们公司生产的除味过滤器主要用于油罐的出口处，结构简单，成本低，是一款您理想的选择材料。

6·The test results have proved that the flow rate widely varied and the pump efficiency is high when the pump outlet line structure was altered and the outlet pressure was controlled in a special limit.

试验结果表明，改变泵出口管线结构，使泵出口压力在一定范围内工作时，流量变化大，而且泵效率较高，可以作为泵调整参数的一种手段；

7·BACKGROUND: Thoracic outlet syndrome can be divided into nervous system type and vascular type according to different compressed structure.

背景：胸廓出口综合征可因受压的结构不同分为神经型和血管型。

8·This paper outlines the modification design for the structure of thermocouple at the outlet of cracker, the selection of sealing materials for new type thermocouple and the operation condition.

介绍裂解炉出口热电偶结构形式的设计改进、新结构形式热电偶密封材料的选择及生产运行。

9·And then the influence of the inlet flow's Mach, the outlet pressure, Angle, high velocity to the structure and major performance parameter of inlet's flow field are analyzed.

分析了来流马赫数、出口反压、攻角、高速旋转等因素对进气道流场结构及主要性能参数的影响。

10·The influence of the working fluid pressure and the structure of ejecting nozzle on the outlet temperature, ejecting coefficient and heating efficiency of the ejecting-mixing heater were analyzed.

对多喷嘴引射混合式加热器的加热性能进行了试验研究，分析了工作流体压力和引射孔结构对引射混合式加热器的出口温度、引射系数以及加热效率的影响。