全部

1·The maximum equivalent stress factor is obtained through the test.

得到了最大相当应力系数。

2·The result of max equivalent stress is smaller than the results of single calculation.

这个结果与前期有限元分析结论是一致的。

3·The thickness of bracket joint has less influence over the maximum equivalent stress of joints.

角板厚度对接头处的最大米塞斯应力影响较小。

4·The finite element internal force method for calculating arch dam equivalent stress is improved.

本文对有限元内力法求解拱坝等效应力分析方法进行了进一步改进。

5·The variation of equivalent stress near the hole wall with the depth of the teeth pressed is analyzed.

详细分析了孔眼壁附近的等效应力随牙齿压入深度的变化关系。

6·An example of the finite element equivalent stress method in engineering design practice is described.

介绍有限元等效应力法在拱坝设计中的运用实例。

7·An equivalent stress method for the structural analysis of derrick with initial deformation is offered.

为此，采用等价应力法对有初始变形的井架进行结构分析。

8·The optimal gate project have been found out by comparing the equivalent stress, strain and the graph of speed.

通过比较等效应力应变值及速度曲线，得出了最佳的浇口方案。

9·Moreover the load effect ratio and conversion coefficient of equivalent stress is defined for practical application.

定义了便于实际应用的荷载效应比和等效应力换算系数。

10·The strength and equivalent stress of the remainder wall thickness of reactor shell under new working condition were checked.

对反应器壳体剩余壁厚在新工况条件下的强度和当量应力进行了校核；