全部

1·Research of damage and critical thickness on loess hidden cave of the highway roadbed;

在对黄土高原主要公路现场调查的基础上，研究了黄土洞穴对公路的危害。

2·Big critical thickness means fast initial heating can be performed, which means the time for debinding can be comparatively shorter.

临界厚度越大，意味着脱脂初始阶段升温速率可以较快，脱脂所需时间可以相对缩短。

3·Formulas for critical thickness of cover and minimal anchorage length of GFRP bars under ordinary and erosive environment were developed.

推导出了一般环境、酸性、碱性和盐环境下适用的GF R P筋混凝土保护层厚度计算公式和最小锚固长度计算公式。

4·We deduce the formula of the critical thickness of ablator, and put forward the rule of how the thickness of ablator affect the velocities and the stability of flyer.

理论上从阻抗失配效应的临界密度公式，推导出了烧蚀层的临界厚度，并推广到飞片的情形，提出了烧蚀层厚度对飞片速度和稳定性的影响规律。

5·If the critical thickness of the hidden caves was estimated, then, the effective prevention measures and cure methods for researching the hidden caves could be gotten.

通过对路基暗穴的安全厚度的正确估算，为研究公路暗穴有效防治措施提供了可靠的依据。

6·Under the new buildings through the gob roof stability calculation and evaluation of new buildings under the gob roof stable critical thickness could be determined whether to deal with.

通过对新建建筑物下采空区顶板稳定性计算，评价新建建筑物下采空区顶板稳定的临界厚度，从而确定是否需要处理。

7·As the electroplating pure copper layer on copper alloy exceeds a critical thickness, the surface electroplating treatment can improve the copper alloy's resistance against oxidation failure greatly.

当铜合金表面的电镀纯铜层厚度超过一个临界值，表面电镀纯铜处理可以明显改善材料的耐氧化剥离性。

8·The critical thickness is determined from the zero formation energy of a misfit dislocation. i. e. the amount of reduced mismatch strain energy equaling the amount of creased dislocation self energy.

利用位错形成能等于零(即错配应变能的降低等于位错自能)的条件，得到了外延生长薄膜的临界厚度。

9·The results indicated that the sealing parameters changed remarkably near the opening critical film thickness in the start up process.

研究表明，启动过程中，密封的特性参数在开启临界气膜厚度附近快速变化；

10·With the hypothesis of critical gas film thickness, a criterion for expressing the opening behavior of DGS, namely the critical opening rotational speed (CORS), was proposed.

根据开启临界气膜厚度的假设，提出了用于分析干式气体密封开启性能的判据——开启临界转速。