全部

1·Method 1 - Making a Paw Print Mold Using Modeling clay.

方法1 -用纸粘土制作爪子印模型。

2·I placed some modeling clay of even thickness on the bottom of the sail cap.

i放置一些建模粘土，甚至厚度对底部的船帆的上限。

3·First I took the RTV master molds and used modeling clay at the right points to get the shape pattern.

首先，我采取了室温硫化掌握模具和用于建模粘土在正确的点，以获得形状的模式。

4·You can easily see how this works with a piece of modeling clay, a nail with a wide head, and a nail with a small head.

只要有一块橡皮泥、一枚宽头钉和一枚窄头钉，你很容易就能看到这一原理是如何运作的。

5·Place the flattened modeling clay onto one sheet of cardboard, then press the second sheet of cardboard on top of the clay.

把拍扁的纸粘土放在一张硬纸板上，然后用另外一张硬纸板盖住它。

6·Use your hands and work a ball of modeling clay that is approximately the size of your palm into a pancake shape 1/4-inch thick.

用你的手把纸粘土攥成一个球形，在手掌中拍扁了以后大概是个煎饼大小，1/4英尺厚。

7·Preheat your oven to 275 degrees. Peel the modeling clay paw imprint away from the cardboard and bake on an ungreased cookie sheet for 15 minutes.

把你的烤箱预热到275度，把印有爪子印的纸粘土从那张硬纸板上揭下来，然后放进烤箱的无油的烤板上烤15分钟。

8·From then on, David began perfecting and expanding his technique and the art of telling stories through slices of modeling clay filmed frame by frame.

从那时起，大卫开始通过一个镜片一个镜片拍摄的粘土割片i完善和扩展他的技术以及讲故事的艺术。

9·In the design phase, Kim started with a lot of sketching on paper and modeling in clay or foam to develop an understanding of the form and scale of the project.

在设计阶段，Kim首先是在纸上画草图，然后用泥土和泡沫做模型，深入了解工程的构造和规模。

10·Carvings on root, stone and nut, painted eggshell, modeling with clay, porcelain and wax are all exquisite, especially those of figurines with their natural beauty.

雕刻的根，石头和螺母，彩蛋，造型粘土，瓷器和蜡都是精致的，尤其是那些雕像和他们的自然之美。