全部

1·Oligomer and a solid accelerator are used to lower its poison and stink.

其采用了齐聚物及固体促进剂，降低了胶粘剂的毒性和臭味。

2·The oligomer obtained featured lower pour point and high viscosity index.

癸烯齐聚物的倾点低，粘度指数高。

3·To study the purgation effect of Mannose oligomer in Amorphophallus konjac.

研究魔芋低聚甘露糖对小鼠的通便作用。

4·An active oligomer has been synthesized from acrylic acid and its derivatives.

以丙烯酸及其衍生物为原料合成出了一种活性低聚物。

5·The oligomer is apt to form a larger scale crystal under a low degree of supercooling.

齐聚物在较低过冷度下易于形成尺寸较大的晶体。

6·Each spot contains a high concentration of an oligomer that is complementary only to its gene.

每个点含有一种高浓度的寡聚物，它只与对应的基因互补。

7·The oligomer content can be controlled by moderating the melt resident time and temperature dur…

生产中可调节熔体停留时间和温度控制聚酯熔体中的齐聚物含量。

8·In the course of anionic polymerization, there are a few transfer reactions and oligomer formation.

阴离子聚合过程中往往存在转移反应，会生成低分子量齐聚物。

9·The theoretical judgements have been confirmed experimentally by the HPSEC data of styrene oligomer.

理论的推断从苯乙烯齐聚物的HPSEC实验数据得到了证实。

10·The results showed that time and temperature was the crucial factors affecting the oligomer formation.

结果表明：时间和温度是影响齐聚物生成的主要因素。

齐聚物

1·The results showed that time and temperature was the crucial factors affecting the oligomer formation.

结果表明：时间和温度是影响齐聚物生成的主要因素。

2·The change of oligomer content was analyzed at static high-pressure state during polyester melt transfer course in screw extruder and pipes.

研究了聚酯熔体在螺杆输送、管道输送过程中及静态高温状态下齐聚物含量的变化。

3·The higher the temperature and the longer the resident time was, the higher the oligomer content was during polyester melt trans - fer course at a fixed screw rotation speed.

在一定的螺杆转速下，温度越高，停留时间越长，聚酯熔体输送过程中齐聚物含量越高。

4·The theoretical judgements have been confirmed experimentally by the HPSEC data of styrene oligomer.

理论的推断从苯乙烯齐聚物的HPSEC实验数据得到了证实。

5·In this paper, the pyrolytic compound of polyurethane acrylate oligomer was analyzed by pyrolytic gas chromatography-mass spectrometry and the pyrolytic mechanism was also discussed.

采用裂解色谱质谱技术对光固化聚氨酯丙烯酸酯齐聚物裂解产物进行了分析，并对裂解机理进行了讨论。

低聚物

1·The still not solved oligomer problem during further processing of dyed PET fibers is as old as the fiber itself.

着色聚酯纤维在进一步处理加工中的低聚物问题与纤维本身一样古老，至今仍未解决。

2·The application of this oligomer in UV curing coatings for improvement of adhesion on metals and its fire retardancy are reviewed.

综述了此低聚物在UV光固化涂料中提高金属表面附着力和具有阻燃特点的应用。

3·The title finish has been developed based on proper mixture of oligomer and monomers and incorporation of non-yellowing photoinitiator. The formulations are designed for various plastics.

本文通过选用合适的低聚物和单体组合，使用非黄变型光引发剂，对不同类型的塑料应用进行配方设计。

4·The curable oligomer may include unsaturated functional groups at each end of a chain, and may further include 3 to 14 ethylene oxides.

该固化性低聚物可以在链的各端包含不饱和官能团，可以进一步包括3 ~ 14个氧乙烯基。

寡聚体

1·Explain how this information can be used to determine the number of polypeptide chains in an oligomer protein.

请解释次信息如何用于确定一个寡聚体蛋白的肽链数目。

2·By some truncations and deletions of ERIS being constructed, it is confirmed that the transmembrane domain was required for oligomer formation.

本文通过制备一系列ERIS的缺失体或截短体，证实了其中跨膜结构域是寡聚体形成所必需的。

寡聚物

1·Each spot contains a high concentration of an oligomer that is complementary only to its gene.

每个点含有一种高浓度的寡聚物，它只与对应的基因互补。